Gateway - Installation Manual
Description
Akiles Gateway provides Internet connection to Akiles devices installed in the home, creating its own BT5 wireless network to which devices can connect.
- 1. RGB LED (device status)
- 2. Reset (factory settings)
- 3. Micro USB connector (power)
- 4. RJ-45 connector (LAN)
- 5. Green LED (activity)
- 6. Amber LED (connection)
- 7. Mounting bracket
- 8. Label with serial number
- 9. Wall mounting holes
Technical specifications
| Feature | Specification |
|---|---|
| Mounting | Standalone/Wall (optional) |
| Dimensions | 62 x 64 x 25 mm |
| Color | White RAL 9016 |
| Signaling | 1 light indicator (RGB LED) |
| Power supply | 5V DC (Consumption < 1W) |
| Ports | 1 Ethernet port (RJ-45 connector). IEEE 802.3 compatible, 10-BASE-T |
| Connectivity | Connectivity: BT (5.0, 4.x). ADSL/Fiber (Ethernet via router) |
| Firmware updates | Over-the-Air (OTA) |
| Material | Polished ABS V0 |
| Temperature range | 0..+45ºC |
| Relative humidity range | 10..90% (non-condensing) |
| IP rating | IP20 (indoor use only) |
RGB LED indicator signals
| Color | Blinking | Meaning |
|---|---|---|
| Blue | No | Started, everything OK |
| Blue | Fast | Updating configuration |
| Blue | Slow | Updating firmware |
| Red | No | Restart |
| Red | Fast | Restoring factory settings |
| Purple | 1 | Ethernet cable not detected |
| Purple | 2 | Ethernet cable detected, DHCP error |
| Purple | 3 | Ethernet cable detected, DHCP ok, DNS error |
| Purple | 4 | Ethernet cable detected, DHCP ok, DNS ok, connection error |
| Yellow | 1 | Connection not received from gateway |
| Yellow | 2 | No connection with Controllers / Cylinders / Roomlocks |
Dimensions
Wiring
The diagram shows the typical Gateway connection with:
- 5V DC / 1A power supply
- Router (LAN cable, maximum 100 m)
Considerations before installation
If 2 devices are to be paired to communicate via Bluetooth, the separation between them should not exceed 25 m on the same floor, nor should the devices be separated by more than 2 floors, in order to have good wireless coverage.
Once the installation has been registered on the Akiles servers (via the administration panel) and if the configuration is correct, the system should work perfectly after powering it on.
On a newly installed device, wait one minute after startup before testing the door opening.
It is recommended that the installation of this Akiles access control system be carried out by a qualified electrician.
Device installation
- Attach the wall bracket in the desired location. Ideally near the intercom and door frame, on the lock side. The power supply connection must be possible.
- Insert the device into the wall bracket, until both fit together perfectly.
- Make the necessary connections to the device: LAN and power.
Device operation
Information on the product’s wireless characteristics
BT5/BT4 frequencies: 2400–2483.5 MHz (max 8 dBm)
Radio frequency exposure information (Maximum permitted exposure)
This device complies with EU requirements on limiting the exposure of the general public to electromagnetic fields in order to protect health. To comply with radio frequency exposure requirements, the equipment must be used at a minimum distance of 20 cm from the user.
Regulations and certifications
This product complies with the provisions of the European Radio Equipment Directive (2014/53/EU).
This product also complies with the essential requirements of Directive 2011/65/EU (RoHS 2), 2012/19/EU (WEEE) and EU Regulation No. 1907/2006 (REACH).
The WEEE symbol (Waste Electrical and Electronic Equipment) indicates that this device and batteries (if incorporated) must not be disposed of with other household waste.
When the product reaches the end of its useful life, take it to a waste collection point in your area for safe disposal or recycling.